上海申弘阀门有限公司
联系人：申弘阀门
手机：15901754341
传真：86-021-31662735
邮箱：494522509@qq.com
地址：上海市青浦区金泽工业园区
英标阀门
上海申弘阀门有限公司
1、BS10:2009
Specification for flanges and bolting for pipes, Valves and fittings
管子、阀门和配件用法兰和螺栓连接规范上海申弘阀门有限公司主营阀门有：减压阀(气体减压阀,可调式减压阀,波纹管减压阀,活塞式减压阀,蒸汽减压阀,先导式减压阀,空气减压阀,氮气减压阀,水用减压阀,自力式减压阀,比例减压阀)、安全阀、保温阀、低温阀、球阀、截止阀、闸阀、止回阀、蝶阀、过滤器、放料阀、隔膜阀、旋塞阀、柱塞阀、平衡阀、调节阀、疏水阀、管夹阀、排污阀、排气阀、排泥阀、气动阀门、电动阀门、高压阀门、中压阀门、低压阀门、水力控制阀、真空阀门、衬胶阀门、衬氟阀门。
2、BS EN19:2002
Industrial valves—Marking of metallic Valves
通用工业阀门的标记
3、BS EN 545：2010 （电子版）
Ductile iron pipes,fittings,accessories and their joints for water pipelines—Requirements and test methods
4、BS EN 558-2008
Industrial valves—Face-to-face and centre-to-face dimensionsof metal valves for use in flanged pipe systems—PN and Class designated valves
6、BS EN 593:2004
Industrial valves—Metallic butterfly valves
工业阀门—金属蝶阀
7、BS EN 736-1:1995
Valves—Terminology
Part 1. Definition of types of valves
8、BS EN 736-2：1997（中文版）
阀门—术语 第2篇：阀门部件的定义
10、BS 970:Part 1:1996
Specification for Wrought steels for mechanical and allied engineering purposes Part 1.General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels
11、BS 970:Part 2:1988
Specification for Wrought steels for mechanical and allied engineering purposes—Part 2:Requirements for steels for the manufacture of hot formed springs
12、BS 970:Part 3:1991
Specification for Wrought steel for mechanical and allied engineering purposes—Part 3:Bright bars for general engineering purposes
13、BS EN 1074-1:2000
Valves for water supply—Fitness for purpose requirements andqppropriate verification tests—Part 1:General requirements
供水用阀门目的要求和适当验收试验的合理性，一般要求
14、BS EN 1074-2:2000
Valves for water supply—Fitnese for purpose requirements and appropriate verification tests—Part 2:Isolating valves
供水用阀门对目的要求的符合性及合适的验证试验 截止阀
15、BS EN 1092-1:2007(电子版)
法兰及其连接件—管道、阀门、管件和附件用圆盘法兰，PN标示——第1篇：钢制法兰
16、BS EN 1092-2:1997
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated
法兰及其接口处—管道、阀门、零配件的环形法兰，以PN标示
17、BS EN 1092-3:2003
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated—Part 3:Copper alloy flanges
法兰及其连接件-标注PN的管理、阀门、配件和附件用圆形法兰-铜合金法兰
18、BS EN 1092-4:2002
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated—Part 4:Aluminium alloy flanges
法兰及其连接件-按PN标注的管道、阀门、配件和附件用圆形法兰-铅合金法兰
19、BS EN 1171:2002
Industrial valves—Cast iron gate valves
工业阀门—铸铁闸阀
20、BS 1400:1985
Specification for Copper alloy ingots and copper alloy and high conductivity copper castings
铜合金锭、铜合金和高导电性铜铸件规范
21、BS 1452:1990
Specification for Flake graphite cast iron
片状石墨铸铁规范
22、BS 1501:Part3:1990
British Standard Steels for pressure purposes:plates,sheet and strip Part3.Specification for corrosion-and heat-resisting steels
23、BS 1502:1982
British Standard Specification for Steels for fired and unfired pressure vessels:sections and bars
24、BS EN 1503-1：2000
阀门—阀体、阀盖及盖板材料 第2篇 欧洲标准中规定的钢种
25、BS EN 1503-2：2000
阀门—阀体、阀盖及盖板材料 第2篇 欧洲标准中没有规定的钢种
26、BS EN 1503-3:2000(中英文版)
Valves—Materials for bodies, bonnets and covers—Part 3: Cast irons specified in European Standards
阀门—阀体、阀盖及盖板材料 第3篇 欧洲标准中规定的铸铁
27、BS 1506:1990
Specification for Carbon, low alloy and stainless steel bars and billets for bolting material to be used in pressure retaining applications
承压螺栓连接件用碳素钢，低合金钢和不锈钢棒材和坯料
28、BS 1873:1975（R1990）（中文版）
石油、石化及相关工业用法兰端和对焊端钢制截止阀和截止止回阀
29、BS 2779:1986
Specification for Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads (metric dimensions)
非螺纹密封连接的管与配件用管螺纹（米制尺寸）规范
30、BS 2789:1985(部分被BS EN 1563代替)
Specification for Spherical graphite or nodular graphite cast iron
球墨铸铁规范
31、BS 2870-1980
Specification for Rolled copper and copper alloys: sheet, strip and foil
辊轧铜和铜合金板材，带材及箔材
32、BS 2872:1989
Specification for Copper and copper alloy forging stock and forgings
铜和铜合金锻坯和锻件规范
33、BS 2873:1969
Specification for Copper and copper alloys wire
铜和铜合金线材规范
34、BS 2874:1986
Specification for Copper and copper alloy rods and sections (other than forging stock)
铜和铜合金棒料与型材（锻坯除外）规范
35、BS 2875:1969
Specification for Copper and copper alloys plate
铜和铜合金板材规范
36、BS 3076:1989
Specification for Nickel and nickel alloys: bar
镍和镍合金棒材规范
37、BS 3100:1991
Specification for Steel castings for general engineering purposes
一般工程用钢铸件
38、BS 3416:1991
Specification for Bitumen-based coatings for cold application, suitable for use in contact with potable water
适用于与饮用水接触用的冷涂沥青涂层规范
39、BS 3468:1986
Specification for Austenitic cast iron
奥氏体铸铁规范
40、BS 4504:Section 3.1:1989
Circular flanges for pipes, valves and fittings (PN designated)
Part3.Steel, cast iron and copper alloy flanges
Section 3.1 Specification for steel flanges
管、阀门及配件用圆法兰（标注公称压力标志数的）第3部分： 钢、铸铁和铜合金法兰 第1节：钢法兰规范
41、BS 4504 section 3.2:1989
Circular flanges for pipes, valves and fitting (PN designated)
Part 3.Steel, cast iron and copper alloy flanges
Section 3.2 Specification for cast iron flanges
管子、阀门及配件用圆法兰（标注公称压力标志数的）第3部分：钢、铸铁和铜合金法兰 第2节：铸铁法兰规范
42、BS 4504 section 3.3:1989
Circular flanges for pipes, valves and fittings (PN designated)
Part 3.Steel, cast iron and copper alloy flanges
Section 3.3 Specification for copper alloy and composite flanges
管子、阀门及配件用圆法兰（标注公称压力标志数的）第3部分：钢、铸铁和铜合金法兰 第3节：铜合金和组合法兰规范
43、BS 5150：1990（中文版）
铸铁闸阀
44、BS 5153:1974(R1977、R1982、R1989、R1991)(中文版)
通用铸铁止回阀规范
45、BS EN 593:2004(此标准代替BS 5155:84)
Industrial valves—Metallic butterfly valves
蝶阀规范
46、BS 5156:1985（R1990）（中文版）
隔膜阀规范
47、BS 5158：1989（中文版）
铸铁旋塞阀
48、BS 5159：1974（R1977、R1982）（中文版）
通用铸铁和碳钢球阀
49、BS 5160:1989（中文版）
钢截止阀、截止止回阀和升降式止回阀
50、BS 5163-1:2004
Valves for waterworks purposes—Part 1:Predominantly key-operated cast iron gate valves—Code of practice
51、BS 5163-2:2004
Valves for waterworks purposes— Part 2:Stem caps for use on isolating valves and associated water control apparatus— Specification
53、BS EN 10204:2004
Metallic products—Types of inspection documents
54、BS EN 1563:1997
Founding—Spheroidal graphite cast irons
铸造—球墨铸铁
55、BS EN 1982-2008
Copper and copper alloys—Ingots and castiongs
铜和铜合金—金属块和铸件
BS EN 12164-1998
Copper and copper alloys-Rod for free machining purposes
56、BS EN 12266-1:2003
Industrial valves— Testing of valves— Part 1:Pressure tests, test procedures and acceptance criteria— Mandatory requirements
工业阀门-阀门试验 第1部分 压力试验，试验过程和验收标准-强制性要求
57、BS EN 12266-2:2002
Industrial valves— Testing of valves— Part 2:Tests,test procedures and acceptance criteria— Supplementary requirements
工业阀门-阀门试验 第1部分 试验，试验过程和验收标准-补充要求
BS EN 12334-2001
Industrial valves-Cast iron check valves
58、BS EN 12570:2000
Industrial valves—Method for sizing the operating element
工业阀门—确定操作元件尺寸和方法
59、BS EN ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries
石油、石化和相关工业用钢制球阀
60、BS EN 60529:1992
Degrees of protection provided by enclosures (IP code)
隔离罩（IP规范）提供的保护等级规范本文相关的论文有：中国阀门产值递增
下一篇：减压阀在干粉灭火装置中应用
